Stripping Paint / Stripping Rust

I wouldnt waist money on stripper, i used that stuff on my cuda hood, took forever and vs the time it took vs a da with 40 g, da was WAY FASTER. Plus you will never get all of it off, i had to go over the place the stripper was, so i waisted money anyways.

Da paper is cheap, stripper is like 40-50 a gal, depending on how many layers of paint you have it adds up quick. We discussed this at school and at my work(body shop)

Da/grinder is fast, what i would do is get a big disc grinder(like a buffer) run over quick to just knock it down fast, then da it. dont use the big grinder(buffer) down to bare metal leaves way too deep of gouges.

For rust, SAND blast is the only way to go, there is any on a big open pannel be carefull it will warp fast. Sand blast, find how out how far the rust goes, then cut out and replace all of it, thats the best method anyways.

Good luck!