pilot bushing
I'm not a fan of those bearing style pilots that fit the converter register. They tend to fail more than the bushing, plus, I don't want hardened rollers potentially eating into an expensive input shaft. I like the bronze bushing style.
SKF B287 is the bushing style
I get mine from Kragen/Oreilly etc. Last one was about $10. IIRC
http://shop.oreillyauto.com/ProductDetail.aspx?MfrCode=SKF&MfrPartNumber=B287
The bearing style is the same as a later model V6 dakota.
Here's a good reference where all this is covered.
http://board.moparts.org/ubbthreads...Number=3669791&PHPSESSID=&fpart=1#Post3669791
I'm not a fan of those bearing style pilots that fit the converter register. They tend to fail more than the bushing, plus, I don't want hardened rollers potentially eating into an expensive input shaft. I like the bronze bushing style.
SKF B287 is the bushing style
I get mine from Kragen/Oreilly etc. Last one was about $10. IIRC
http://shop.oreillyauto.com/ProductDetail.aspx?MfrCode=SKF&MfrPartNumber=B287
The bearing style is the same as a later model V6 dakota.
Here's a good reference where all this is covered.
http://board.moparts.org/ubbthreads...Number=3669791&PHPSESSID=&fpart=1#Post3669791
