Gauge cluster restoration?

Novus It's a three part process. Start from the rough grain and move to the soft...Worked well. Also, I used plastic epoxy. It's stronger and last longer then model glue. Can get it in different colors if need be. Plus its thicker and easier to work with.

http://images.google.com/imgres?img...e=off&client=safari&rls=en&sa=N&start=63&um=1

Just and FYI. The PO had the speedo lens pop out while he was cleaning my 66 barracuda. I didn't want to remove everything to put it back. So i got thick model glue, put a small dab on the areas where it had broken away from the housing. Now comes the tricky part...how do you grab a flat plastic lens that is installed?

I took three soft darts from my son's dart gun. (You know the ones that have little suction cups) placed them on the lens and pulled it in place. Held it for about two-three minutes. Let go. Left the darts in place over night. Popped right off and the lens looks like it never came apart.

Good luck! Its easier than it sounds. But do use plastic epoxy...much better then model glue. (If I had pulled the gauges on the 66, I would have used the Epoxy)

Aloha!