Rocker Stands For Magnum Valve Train??

moper said
Pic is stock magnum. Looks like the holes are perpendicular to the rocker stand on them. 360's right. I missed that in the pic. Maybe it's just the picture. Do the bases of the studs sit flush to the stand on others? Maybe check with a light. If the arc isnt changed by raising the height of the rocker fulcrum point centerline something is off. Have you tried lowering the rocker on the stud?

Moper,

If you know your installed height on the retainer or the top of the valve and then straight edge off the top of the valve or retainer across to the stud and get a measurement from center of the valve to center of stud, that just might explain everything?? I know the valve is where it needs to be, it has to be the stud!

Thanks in advance for your help.