Kb190 Pistons And Eddy Heads

ok i clayed my cylinders this morning and have a bout 0.038-0.039 clearance for piston so i can allways get bigger gaskets to bring that up while i was in there i clayed valves on one cylinder just to check if the cam i had was going to work. i layed about a 1/4 peace of clay on both valve reliefs and rotated then it stoped so i didnt force it i pulled all back apart and found that my intake valve completly compressed the clay and the exhause valve barely touched it so the intakes is obviously going to hit the piston i have the comp cams 294s cam .525 lift and 294 duration my question for you guys is cam recomendtaions other then this one since it is obciously to big for the set up i currently have.. and here are the details 360 0.060 over kb190 pistons with the eddy open chamber heads victor intake and headers arp everything what cam woudl you guys recomend that i run with that set up??? that you might know off hand that will work so i dont order it get it and still does the same thing any ideahs guys?? i want to run solid too