Rhs Indy X Head Thread

Head porting, intake manifold porting, 8mm Ferrea valves, Comp beehive spring setup, hone guides to 8mm, mill spring pads down for springs and .600 lift, mill guide tops down for retainer to seal clearance, valve job, surface cut, hot tank, and assemble/set spring heights plus seals and checking chamber volume on both heads.
Plus is was done right...I believe he spent more and got way less with someone else????

The valves are more expensive than 11/32 valves, be everything else is the same as any head.
That also includes flow testing before, after and with the intake manifold bolted to the head.
Oh and I set up the rockers for him on the heads, cleaned the shafts out, set the side clearance on the heads. Louis didn't want to bother with that.
It's all just labor....You should price an Indy setup with everything corrected/clearanced and setup to run...you'd think this was a basement bargain!!!!