W-2 heads W/ hyd cam?

Guitar Jones said
I would think buying a mechanical cam and lifters and keeping the W2's would be cheaper. I know there's better cams out there but the MP .590 solid cam performs well and it's not expensive. Alternatively the .557 cam isn't bad either and would offer a little more valve to piston clearance if that's a problem.

guitar jones these cams will work fine with 10.5:1 C.R. and run ok on pump gas???? The compression I have come up with is from using a 65 cc head, -5 CC on piston dome and .008 negative piston clearance. I believe these heads could be a 62 Cc which i know will change the C.R, and I know I have to get these heads CC'd, that is my next step. i appreciate the info so far.

Thanks again.