340 ideas..

Just to clarify, I have yet to find a supplier who makes a tie bar for solid roller lifters that clears an MP block with no grinding. A solution could be keyed lifters, but that decision needs to be made prior to having the lifter bores bushed. A simple solution I gave to Ryan is use a 5.9L Magnum block, and the factory hydraulic roller setup, with a custom cam, or the MP block, using the factory spider and hydraulic roller lifters. You may still be lift limited, but it's a lot less $$, and safe. Or, dont use the MP block at all. A 340 block with 2 bolt steel caps is plenty strong, 4bolt caps are a waste on a factory block. Any other ideas out there?