Dart radiator size
On our 2 street cars we have used aftermarket aluminum radiators for a foxbody mustang and then I built 4 ears out of aluminum angle and had them welded on. If you do this(make your own brackets drill the hole then cut the angle, its alot easier than trying to drill 7/16 holes in a half in wide piece of angle lol.
Another pic of it installed:
They seem to work well and we dont have any cooling issues. We dont run thermostats in any of our stuff just the thermostat gutted so it acts like a restrictor. I just dont want to trust one of our engines to a 1.98 part. If you go this route make sure the radiator has a drain,I had to have one installed in the radiator in our 67gt and our duster still needs it done. The radiator in the pic is in our duster and I got it out of a friends mustang gt after he wrecked it is why it looks banged up but it works fine,doesn't leak.
Good luck,
Jr.
On our 2 street cars we have used aftermarket aluminum radiators for a foxbody mustang and then I built 4 ears out of aluminum angle and had them welded on. If you do this(make your own brackets drill the hole then cut the angle, its alot easier than trying to drill 7/16 holes in a half in wide piece of angle lol.
Another pic of it installed:
They seem to work well and we dont have any cooling issues. We dont run thermostats in any of our stuff just the thermostat gutted so it acts like a restrictor. I just dont want to trust one of our engines to a 1.98 part. If you go this route make sure the radiator has a drain,I had to have one installed in the radiator in our 67gt and our duster still needs it done. The radiator in the pic is in our duster and I got it out of a friends mustang gt after he wrecked it is why it looks banged up but it works fine,doesn't leak.
Good luck,
Jr.
