DIY Wheel bearing?

Had a axle bearing lock up at the drive-in theater. Went back the next morn pulled the axle , took it to a shop and had a new bearing pressed on. Went back to the car fixed it. Took most of a day. Was a 68 or 9 Pont. Lemans.
Some of the bearings are nearly impossible to find ( se 63 Impala ). Atleast yours is at home. You will need to identify what rear you have. For what its worth... even if you didn't need to remove the center cover to remove the axle, you should remove that cover and clean the gear oil.
Be sure to pre grease pack any axle bearing that gets differential oil lubrication.
Geter done, with or without a floor jack. Good jack stands and wheel chocks are more important.