Stumble issue

I'd start off by backing your timing down to 12 deg initial, 18 is usually to much unless you're running 102 octane and disconnect the vacuum advance if you haven't allready. If 12 works better you'll have to recurve the dizzy for 36 total at 2200-2400 RPM. Do you know what your comp. ratio is and what kind of heads.

I was told they were 77 heads and 9.5 to 1 compression but I dont know for sure. Yes I do have the vacuum advance plugged. I will try to back the timing down and see what happens. Thanks for the help guys!