Supercharging a 440 Stroker

ok, before you start buying stuff. purchase "street supercharging", a mopar engine and a chassis book and read EVERYTHING first. what you'll need to do to the hotrod is tie the frames, at least mini tub it or do a back half, install at least an eight point cage. go with a dana 60 with at least superstock springs or perferably ladder bars and coil-overs. what ever your budget dictates. after all the reading and building your hotrod start planing the motor and trans. on the street you only need a +.060" over 440 and 727. on top of this a 6 or 8-71 and two blower carbs. put the tallest, widest tires is the rear that will fit with a bit a wheel well body work.