Suggestions for a 318 build

get 9.0 or CR use magnum heads (stock w/1.6 rockers) new from eq heads or hughs, or a reman set. next set would be a set of reworked 302, 1.88 valves ect.. but that will cost $$. a set of magnums would be the best bang for the buck.. if you get used mag heads watch them for cracks.

cam id go with the xe 256 or 262 if you use mag heads remember the lift will be larger with the 1.6 rockers vs the 1.5 and you will need lifters and PR with oil holes in them.. oh you will need a set of PR for the mag heads/LA block.

carb i would maybe use a TQ tweeked by demonsizzler or an eddy,

RPM air gap.. or the cross winds for the magnum heads.

headers..

roller chain with tensioner,

ask the machine shop to get you the right pistons for the right qench

a good ignition system, like the MSD E-curve dist..
wires,coil ect..

a good rebuilt trans, like a 904 with a low gear set, good 5 disc clutches,wider band, TF2 kit and TC. Or if you do a lot of highway driving maybe sqeeze a OD in it with 3.73 gears in the rear.

then tune tune tune and go play..

any way you build it, it will run good and strong for many years.. you will love it

Don