Lower control arm

I believe what Rumblefish360 and Eric S68 are talking about is removing the Torsion Bars, and yes Mancini Racing has those tools - they are great as I've bought them and they make removing the torsion bar much easier than my homemade stuff. However, if your looking to swap out the Lower Control Arm Bushing, that's a different story. I've done it the hard way myself with a cold chisel and a sledge hammer. it took a long time, but I did get it out. Between swinging the sledge hammer and trying to bend the outside of the Bushing so that I could get it out of the control arm, it was a hassle and I was quite tired of swinging the sledge hammer when it was over. I took the other side to a local machine shop and the guy had it out and back to me within an afternoon and changed me only about 10 - 15 dollars for his time. I'm not sure what he used - I think he has a hydraulic press, but I'm not sure.
I also got the Upper ball joint socket from Mancini racing, and that is wonderful also!
Hope this helps.