rumblefish360 SLACKIN!!!!! \\/
Yaaa-Hooo!!!!!!!
Yep! I admit it! :blackeye: spent most of the day entertaining my co-workers! :jocolor:
This is what I found:
Flat-machined rocker pads that require rocker stands and long valves for higher lifts.
W2 Race Heads
P4529446 Race 59° head, 70cc open chamber - 18° valve angle
P5007336 Race 48° head, 47cc closed chamber - 15° valve angle
P5007355 Race 59° head, 68cc closed chamber - 18° valve angle
P5249769 Race 59° head, 65cc closed chamber - 18° valve angle
In a nutshell: Has flat rocker pads and requires rocker shaft stands, requires long, 2.02I & 1.60E, 3/8 stem valves, flows 260 cfm unported (should support 540hp no sweat!), can be used with stock 59 degree tappet bores, will require offset rocker arms, and they are legal, although considered experimental, heads for circle track racing.
Oh yeah, almost forgot, they probably have raised exhaust ports with a spread bolt header pattern.
I take no responsibilty for the above information as I have been completely useless today as well as a general goof-off! :tongue5: