318 upgrades

Jamakin, the Summit cam and lifter sets work fine but that MP one I suggested will work great for ya! You don't need all the stuff in that Comp kit. You've got a new timing chain...if you don't wanna do the heads, just do the springs and the cam/lifters. Your stock keepers and retainers will be fine.

Here's the listing for the springs:
http://www.summitracing.com/parts/DCC-412024/
Ouch at $8.95 ea. Get the specs and buy the springs in Summit brand or wherever you can get them reasonably priced.

Good price on the cam and lifter set though. That cam will outperform the Summit cam...just compare the usable rpm range.

While you're swappin the springs, swap these too:
http://cgi.ebay.com/ebaymotors/TEFL...r_Truck_Parts_Accessories?hash=item3ef8750453

What intake/carb are ya gonna run? A used small port dual plane is cheap and easy to find and it's just as easy to find a replacement carb...$ LOL

Rumble, S&S Cycle bought up Crane and they are going to continue on!
This great because Crane is a really good company and they are right down the road from me.
http://cranecams.com/?show=crane-ss