To stroke or not to stroke......

One of the 360's that we have runs on pump 93 and runs in the mid to upper 11's, including all the machine work and parts the total bill is just at $3000.00 when we did it a year ago. The price now would be 25% higher as parts went up like everything else. The car scaled @ 3290 lbs. and never went over 6000 rpms I believe it went thru the traps @ 5700 rpm's or so.
The aftermarket parts were a comp cams cam, mopar intake, holley carb., comp springs, adjustable rocker arms (iron), a set of chrome moly pushrods 5/16, and comp lifters.
The rest of the engine was a rebuild kit with rings, brgs., gaskets, chain and gears, oil pump and screen, after this the rest was in machining $1600.00 worth. This engine now would cost about $3300.00 - $3400.00 due to parts cost. This would be a very streetable engine and run too and could easily go 100K mi.. Mine did after 3 years in the work truck at 35,000 mi. a year and now at the track.
Just my .02 worth.