Frustrated

You truely have a mix-matched package for low end torque. The other guys have hit upon it.

Convertor is too large diameter

Too large of cam

Too large of exhaust size.

Traction aids aren't helping the situation.

You have torque the problem is that most likely it's peak is 3500 - 4000 or more. You need to get your motor to that RPM if you want the best chance of tearing up rubber.

Being you really don't want to change your engine package at this point. The easiest way to go do a bake show is raise the pressure in your tires to about 50psi.


Chuck