360 oil pan

windage tray-crank scraper same same....LOL
ya have to attach it to the cap stud LOL:cheers:

Oil pickup sticks out of the pump. Not a bad thing to torque it in to where it needs to be and then tack weld the pickup to the pump. I've also seen a custom job where they cap off the stock location and have a half inch pickup coming out of the face of the pump!

Quote lhearold
"I like the kevco because it doesn't have any clearance issues with the k-member, tucks up nicely so it doesn't drag, has a built in crank scraper and trap door baffles so your oil stays where it belongs. You will need one of the LA main bearing bolts with the stud for the windage tray to mount it properly though. that was the only pain I found."