Supercharged 360 in England
With some more work I think this will run a 10.
Here`s the basic set up.
8 to 1 low comp +0.030 360
6/71 blower set on 6 psi
2 x Carter 600 cfm 4 barrell carbs on 1" open spacers
Home ported T/A heads + home ported Offenhauser intake
Sunoco 117 octane leaded race gas
2500 stall convertor
MSD 6al, MSD leads and dizzy
TTI headers
Comp Eng 60/40 drag shocks front
Caltrac split mono leaf rears with Comp Eng shocks
Small bolt pattern Cetrelines with lightweight wilwood discs up front
135 / r15 / 73t front tires @ 45 psi
28 / 9 / 15 rear tires at 8 psi
Ford 9" rear with 411 Richmond ring and pinion
Holley blacktop and fuel line cooler set at 5.5 psi
Car weighs 2500 lbs without driver
Lexan all round, glass hood and trunk, no dash or interior, doors and everything cut and lightened
Am currently building a 408 stroker which will be lighter than this. Stroker build will be 500 hp plus 100 shot of nitrous. Car without supercharger will be 2400 lbs and approx 580 hp
:toothy10:
Hard work for us over here as everything has to be bought in USA and shipped in
With some more work I think this will run a 10.
Here`s the basic set up.
8 to 1 low comp +0.030 360
6/71 blower set on 6 psi
2 x Carter 600 cfm 4 barrell carbs on 1" open spacers
Home ported T/A heads + home ported Offenhauser intake
Sunoco 117 octane leaded race gas
2500 stall convertor
MSD 6al, MSD leads and dizzy
TTI headers
Comp Eng 60/40 drag shocks front
Caltrac split mono leaf rears with Comp Eng shocks
Small bolt pattern Cetrelines with lightweight wilwood discs up front
135 / r15 / 73t front tires @ 45 psi
28 / 9 / 15 rear tires at 8 psi
Ford 9" rear with 411 Richmond ring and pinion
Holley blacktop and fuel line cooler set at 5.5 psi
Car weighs 2500 lbs without driver
Lexan all round, glass hood and trunk, no dash or interior, doors and everything cut and lightened
Am currently building a 408 stroker which will be lighter than this. Stroker build will be 500 hp plus 100 shot of nitrous. Car without supercharger will be 2400 lbs and approx 580 hp
:toothy10:
Hard work for us over here as everything has to be bought in USA and shipped in
