intake question

-
66plyValiant

66plyValiant

Well-Known Member
Joined
Mar 7, 2010
Messages
2,708
Reaction score
138
Location
windsor NS
on the underside of the intake on a 318 2 barrel there is a plate that is factory riveted to the intake (directly under carb) and the rivets have been cut and the plate was welded back on (I believe because the intake was carboned up at some point) there is one spot that the plate isn't totally flush with the intake, will this cause the intake vacuum to draw through this spot and draw oil into the intake runners? I haven't came across this before and have no Idea! is there vacuum under this plate? please help guys
 
does it have a egr or heat tubes for the choke? mine has the ribets still but there is no way it was sealed tight.
 
Its just a heat sheild to keep oil off the exaust egr port. It wont cause an intake vacuum leak.
 
no tubes for the choke its just a spot in the intake where the choke sits like most mopar small blocks. thanks daliant
 
You must log in or register to reply here.
-

Back
Top