Spring Relocation Question
there are 2 ways to do it,
1st use has offset front hangers that move the spring in 3/4", and use a 3/4" offset shackle in the rear...
Here are the basics...
http://chucker54.stores.yahoo.net/offset.html
http://chucker54.stores.yahoo.net/ofshacset.html
2nd "The Kit" moves the rear shackle through the frame(like you have seen), and the you cut/weld a new box into the frame up front that the spring sits between also. Looks like this...
http://chucker54.stores.yahoo.net/sprinrelkit.html
P.S.
i have the 2nd type minus shackles/bushings I am not gonna use... yours for $50 if interested...
Print