**To Cut or Not to Cut**

to bad your in calf we could make a deal unless your real good at fab work it's a job . not only a lot of welding, sheet metal work , getting it all square to run true . it is not something i would start again an have yet to finish lost interest . really an truly you need to build a fixture to hold it an build at ride height . theres no second guessing that way i did most of mine on jack stands what a pain in the arse ..... ck Art Morison he has alot of info an his web site to help ...... personaly to clean of car to chop up for the first one ..... an that what you do to tub one out .... my idea was to do basicly the same thing .. my wheels i wanted to an did was use rally wheels 15" wide an have the off set to the inside so when you look at the car it look stock till you look from the back ... stockton wheel f that up a set the off set to the out side ....went with center lines 15 x 15 31x18.5 mt shorten 8 3/4 shocks easy spring rate different story 14' springs or 10' spring rate all depends on where an how you mount i figured 125 lbs but went with 150 got a deal at swap meet