Main bearing thrust bearing too tight!!

Did some careful inspection today and guess what i found.... just what onecat said some burrs and dings to both the main cap and block. I spent some time cleaning things up a bit and it made a big difference, the bearing halves now slip into place firmly just like they should. I set the crank into place for a clearance check and it looks good, a 0.002" feeler gauge slips between the crank and the thrust bearing. The mains measure 0.0015" I will check end play tomorrow with a dial indicator and see what i get. Thanks everyone for your help and suggestions, John thank you for the offer to call, glad i was able to get it handled on my own (with your help:-D). Maybe i should find a new machine shop.