Oh man, Steering problem

Did a little checking... move the valve forward (downwards) to get the steering to go right - back (upwards) to go left. Be aware that we are talking about miniscule movement of that valve housing - 0.5mm to 1 mm (1/32" to 1/16") at a time. Best put the front wheels up with jack stands under the lower control arms for this.

Also, if the wheel is snapping hard over right now, the pump is likely going to max pressure - you might want to start by setting the housing to what you think is the centre of its movement on those attaching bolts before you start the engine again. Less wear and tear on the flow control valve, pump, hoses, gear and pressure relief valve that way!