flip the front spring mount to low the ride height

mikesduster heres my combo

30 over 340 with bme dome tops comes out at about 11.5 comp.
eagle h beam rods
j heads with clean up work 240/140 @500 2.02/1.60 val. comp cam 995 springs
x-cal intake that i matched the ports to the heads with a 950 hp carb
82/86 jets 6.5 pv in the front/no pv in back
mp dizzy locked out timing set at 38 for now/3924 autolite plugs gap @40
comp cam 242/250(i think) soild cam 520/540 lift 16/18 lash with 1 5/8 headers into 3" pipes that go into flow master muff.
727 rev.patt with 9.5 verta 5000 (flash at 4000 on return road) 8 3/4 with 4.57 gears and 28/10.5 m/t slicks
1970 duster 8gal. cell 1/2 fuel line from front to back holley blue pump and reg.
all steel 1 race seat and 1 old stock seat
frame tied
stock brakes front and stock steel wheels

car run pretty good has more init pinion angle is way off going to get it set sometime next wk. +1 deg. with 5deg. shims

going for 5-7 nose down i think..
best today it has ran [email protected] mph with 1.663 60'
on the same night it went a [email protected] with a 1.702 60'

if i can get it to 60 better i think it will surprize me ill try and repost a pic of my car cant find it on this puter....