Body panels and Frame rails
Inner fenders with firewall extension for an A body. These are from a 72 Scamp. Will work for any a body 67-76. Surface patina only.
Don't ask about the bumper, it's gone.
$125 each plus shipping from Indio, CA
---------------------------------------------------
Wheelhouses for a 67-69 Cuda or 70-76 Duster/Demon/Dart Sport. Cut out at spot welds. AMD get 125 per half so $250 for each side.
NO RUST!
$125 each plus shipping from Indio, CA
---------------------------------------------------
Complete floor pan for a 67-69 Cuda or 70-76 Duster/Demon/Dart Sport. Removed at spot welds.
AMD gets over $400 for the same panel plus about 120+ to ship
Mine is $225 + shipping via greyhound which usually runs at most around $75 anywhere in the continental US. EX: I shipped a floor pan to PA for about $60
---------------------------------------------------
Rear floor pan section for a Dart or Scamp. no Rust on this one at all. Super clean replacement for the rear footwell area.
$100 + shipping from Indio, CA
--------------------------------------------------
Rear Frame caps section including extensions, goes behind bumper. Nice clean piece from a CA desert car.
AMD gets $199 for the main panel and another $40 for the extensions
MY price ---- $100 + shipping
-------------------------------------------
Upper control arm mount sections. I have a drivers and Passenger side. Will cut them out of the pictured rail wherever you want.
One vendor was discussing fabbing these up and the est. price was $169
Mine $60 each + shipping from Indio, CA
-------------------------------------------------
67-76 A body Rear Frame Rails. Great shape, surface rust only, NO ROT.
$125 EACH + shipping from Indio, CA
------------------------------------------------
67-76 Radiator yoke for a 26" radiator.
$75 + shipping from Indio, CA
-------------------------------------------------
Cowl section from a Duster. Should fit Demon and Dart Sports. NO RUST. Has the upper and lower cowl sections including where the vent boxes attach.
$75 + shipping from Indio, CA
-------------------------------------------------
Inner fenders for an A body. These are from a 73 Duster. Will work for any a body 67-76. Only have the Pass side left, drivers side sold.
$80 plus shipping from Indio, CA
------------------------------------------------
PM or e-mail to robule1 at yahoo dot com
Inner fenders with firewall extension for an A body. These are from a 72 Scamp. Will work for any a body 67-76. Surface patina only.
Don't ask about the bumper, it's gone.
$125 each plus shipping from Indio, CA
---------------------------------------------------
Wheelhouses for a 67-69 Cuda or 70-76 Duster/Demon/Dart Sport. Cut out at spot welds. AMD get 125 per half so $250 for each side.
NO RUST!
$125 each plus shipping from Indio, CA
---------------------------------------------------
Complete floor pan for a 67-69 Cuda or 70-76 Duster/Demon/Dart Sport. Removed at spot welds.
AMD gets over $400 for the same panel plus about 120+ to ship
Mine is $225 + shipping via greyhound which usually runs at most around $75 anywhere in the continental US. EX: I shipped a floor pan to PA for about $60
---------------------------------------------------
Rear floor pan section for a Dart or Scamp. no Rust on this one at all. Super clean replacement for the rear footwell area.
$100 + shipping from Indio, CA
--------------------------------------------------
Rear Frame caps section including extensions, goes behind bumper. Nice clean piece from a CA desert car.
AMD gets $199 for the main panel and another $40 for the extensions
MY price ---- $100 + shipping
-------------------------------------------
Upper control arm mount sections. I have a drivers and Passenger side. Will cut them out of the pictured rail wherever you want.
One vendor was discussing fabbing these up and the est. price was $169
Mine $60 each + shipping from Indio, CA
-------------------------------------------------
67-76 A body Rear Frame Rails. Great shape, surface rust only, NO ROT.
$125 EACH + shipping from Indio, CA
------------------------------------------------
67-76 Radiator yoke for a 26" radiator.
$75 + shipping from Indio, CA
-------------------------------------------------
Cowl section from a Duster. Should fit Demon and Dart Sports. NO RUST. Has the upper and lower cowl sections including where the vent boxes attach.
$75 + shipping from Indio, CA
-------------------------------------------------
Inner fenders for an A body. These are from a 73 Duster. Will work for any a body 67-76. Only have the Pass side left, drivers side sold.
$80 plus shipping from Indio, CA
------------------------------------------------
PM or e-mail to robule1 at yahoo dot com