1967 cuda carpet

-

mjdcwo

Senior Member
Joined
Nov 25, 2005
Messages
25
Reaction score
0
Location
Western New York
I'm installing a Legendary carpet set in my car that has had the interior removed for the last 3 years. Does anyone have some pics of how the carpet goes on the sides of the console? The kit also has two "dogleg" looking pieces. Does anyine know where they go? Any info and pics will be a great help.

Thanks.
MJDCWO
 
Tony,
Yes, it is a fast back. 2/3 of the way down the right side of your photo is a "dogleg" looking piece. Where does that go? Do you have a finished picture of the carpet on the side of the console? I think I remember that it is glued to the sides and just kind of "hangs down" over the edge of the driveshaft hump but a picture would really help.
Thanks,
Mike
 
Tony,
Yes, it is a fast back. 2/3 of the way down the right side of your photo is a "dogleg" looking piece. Where does that go? Do you have a finished picture of the carpet on the side of the console? I think I remember that it is glued to the sides and just kind of "hangs down" over the edge of the driveshaft hump but a picture would really help.
Thanks,
Mike


Those go on the bottom of the fender wells where the back seat brackets go.

There was another post showing this....let me find it

http://www.forabodiesonly.com/mopar/showpost.php?p=910487&postcount=11

The little dog legs go on the "Tip" of the panel with the hole thru it.

Don't have a pic of the carpet around the console, but you are correct
in your thoughts on it. The straight edge glues to the console and
uneven side hangs down.
 
Thanks Tony, that helps. If anyone else has a picture of the carpet on the console and the dimensions (how far it hangs down) that will help me get it right.
Thanks,
Mike
 
-
Back
Top