318 Stuff + Blower

Lots of Small Block Block Mopar Parts

$300 8-71 blower off of an 8-71 diesel.
No serious pitting, NO bearing play. A quick spin by hand and you can feel the air blowing.
You'll need a manifold, carb plate and drive setup, but if you're brave enough to try fabbing, you can make some CRAZY horse power for cheap!

$75 318 Forged crankshaft

$500 302 casting Swirl Port closed chamber 318 heads fitted with 1.94-1.60 valves so no cylinder notching is required, 20 miles on rebuild (bottom end died)
http://www.hotrod.com/howto/113_0304_318_small_block_build/index.html

$75 like new condition camshaft with complete Gear drive setup (also have lifters which have been carefully kept in order)
Will seperate the gear drive and sell it by it's self for $50
Purple Shaft Cam
Adv. Duration: .268°/272°
Dur. @ .050'': 228°/231°
Lift: .450''/.455''
Centerline: 110°
Basic RPM: 1500-5800 RPM

$75 1967-74 318 block bored .040 over

$15 1974 Carter Mechanical Fuel pump

$25 1974 Power steering Pump

Complete set of brackets -make offer

1967-74 318 heads 9600 miles on rebuild (have old smooth cracks between exhaust ports but no leaking they were rebuilt with the cracks) -make offer

1974 360 factory 2bbl manifold -make offer

1974 360 factory 2bbl carb -make offer