Boot For Pistol Grip?
You are going to have a hell of a time trying to find/buy a
Console Pistol Grip Shifter Handle!
If it were me I would build my own....
Make a piece of bent steel to match your stock
Console Shifter Base piece....
Find an abused/cut
Pistol Grip Handle and cut it to fit then weld the 2 together.
Watch the
Shifters angle or you will be smashing your knuckles into the
Dash on 1st and 3rd shifts!
Then restore if neccesary the
Grips and
Bezels.
Here is the
non Console one I made for my '72 Dart from a cut B Body
non Console Shifter Handle:
Shown in Neutral
For the
Floor Boot I used a standard A Body
Shifter Boot, Heated it up with a
Heat Gun -
CAREFULLY!- and while warm put the
Pistol Grip Handle through the hole..
As for the
Console Boot try a
Stock B Body Pistol Grip Handle Boot and form to fit your
Console Top Studs.
Hope this helped!
Later,
Bruce B.