Barracuuuuda sign

-
Status
Not open for further replies.

RPM

Superior Member
Joined
Apr 5, 2006
Messages
3,024
Reaction score
20
Location
Meridian, Idaho
Rating - 100%
46   0   0
Contact seller
Ok gang here it is. Hot off the CNC plasma cutter.
Ya all called out for it so this is what we came up with.
Hope ya like it. This is cut from 16 guage steel and is not finished. You can finish however you like. (I recommend Phoenix Specialty Coatings for a nice powder coat)

"FISH A" (no longer cutting the smaller ones here)
The one in the pic is 16" length approx 9" height. These ones will run a price of $28.00 which includes shipping to the lower 48. I will ship to Canada, but shipping will be calculated.
P1030653.jpg


P1030655.jpg


>>>LOOK>>"FISH B" (order by this)<<<<<< not shown in pic
this will be the exact same design as the pics above, but will be a little larger.
Approx 20" length and 11" tall or so. The price for the larger one will be $35.00 which includes shipping to the lower 48. Will ship to Canada, but will have to calculate shipping.


Items will ship out of Boise, Idaho.
Payments accepted are: postal money order or PAYPAL
Send me p.m.'s if you want one.
-RPM
 
those came out sharp!.

did you end up using the logo i provided? kind of looks like the fish I did .

Turned out real nice though, I am sure they will sell like hot cakes
 
I`d like to get one gold plated with a chain on it, so I can wear it like Flavor Flav. :glasses7:

Very nice work, I may be in for a small one.
 
If Leanna can powder coat the fish chrome or close, the top of the circle blue and the bottom of the circle red then I may want one!
Sorry for the bad photoshop, but you get the idea.

Sign.jpg


Leanna, What do you think?
 
If Leanna can powder coat the fish chrome or close, the top of the circle blue and the bottom of the circle red then I may want one!
Sorry for the bad photoshop, but you get the idea.

Sign.jpg


Leanna, What do you think?



No problem RogerK! The only limit is your imagination. I can do whatever you wish.

I have a couple chrome looking powders but the fish might look better / flashier in Alien Silver or Silver Glaze -- a light argent -- instead. (The chrome powders cure at a lower temp than other powders and require a clear coat that can dull the finish somewhat.)

I've got quite a stash of RPM's various CNC signs here and am working through them per individual custom orders. They're all nice, clean heavy gauge metal and I'd expect nothing less from these Barracuda signs.
 
FISH B for me. Then send to Leanna. PM sent...or sending as soon as I finish this....

Aloha Mike
 
FISH B for me. Then send to Leanna. PM sent...or sending as soon as I finish this....

Aloha Mike


Thanks Mike! It will be great getting to work with you again. What's this make, the third or fourth? :-D All are appreciated, as is your continued loyalty. I'll let you know when it arrives and then we can discuss what you want me to do with it.
 
OK I really shouldn't, but this one is just too cool! I'll take one of the larger B signs and would like it shipped to Leanna for powder coating. PM sent!

HEY LEANNA! Empty some of your PMs, Your box is full. I'm guessing thats a good thing, proably full of orders!:cheers:
 
RogerK, it's cleaned out a bit now (it's a never ending thing, believe me). Thanks for your business and confidence in my abilities!!! :-D
 
RPM,is there a link to a list of all the different signs you have?8) I have forgotten most of them,but I hope to have FISH A for a July 1st show.8)
 
DRENO, if you use the search key and type "sign" in the keyword box it should bring up a list of all the threads.

I know there's PLYMOUTH, DODGE, MOPAR, the Mopar "M," Dart Drive, this fish emblem in this thread, and at least one other one I can't recall. Hopefully Scott will chime in and annotate my CRS. :-D
 
Thanks for posting that Leanna.

The first order of these is put in for cutting as of June 1. Shouldnt take long and I have all that inquired and maybe a extra one in case. Still have not recieved a payment from one or two, but I ordered them and will be in contact with those parties. Once I have these in my posession I will immediately ship to locations as were discussed and will provide all with tracking numbers. Thanks for the great response on these.

Leanna... there will be a few heading your way.

-RPM
 
Signs are all cut and all done as of June 2. I have started packaging and getting ready to ship. Those that ordered will be getting tracking #'s here in the next day or two.

-RPM
 
Status
Not open for further replies.
-
Back
Top