Thanks guys. Went and worked a bit on the car but I have to tell you I'm still not 100%. Wired in the Painless relay for the fuel pump and mocked up a mounting plate for the coil. All I need to do is run the yellow wire for the key start. I was going to mount it inside next to the MSD but I wanted to keep the coil wire short. All I need to do is cut the plate to size with a band saw. The coil will be mounted away from the firewall and insukled from the header heat. I'll pickup a battery tomorrow so I can start testing. As soon as I get the cage in I'll go ahead and splice into the starter cable and run that into a on/off switch mounter inside to the cage. I'll end up having a shutoff switch outside and one inside.
