new clutch

The old man and I once put straps around the tranny from inside the car, then ran a stout piece of wood across both doors (windows down)with the tranny safely dangling by the straps,. We were able to safely yank the trans out and onto the floor creeper with plywood over that was positioned underneath the car. It worked.

Get as creative as you want, either muscle it out or rube-goldberg it. but BE SAFE. Sure you can lift something that weighs the same as a tranny, but try doin it on your back with a big shifter sticking out of it and caked with grease. Its a whole 'nother ballgame at that point.

You can also pack the pilot bushing full of grease and use a soft mallet on the aligning tool to hydraulically press the bushing out. But replace that bushing no matter what. You're already in there, just do it.