67 Valiant: brake problems. need help

I used a 16oz clear water bottle and a length of clear air hose (like that found on a fish tank) that you can get at walmart. It's 1/4 inch in diameter. I then drilled a hole in the top of the plastic cap on the water bottle 1/4 inch drill size. I then drilled a very small hole again in the bottle cap off center. I used the smallest bit I had. This to allow air to escape.

I then pushed the clear hose into the bottle cap (cap should be on the bottle now) and pushed the hose almost to the bottom.

What we have made is a bleed bottle that you connect to the bleeder valve. Have someone pump the brake untill you see no more bubbles in the clear line in the bottle. Once you have no bubbles have your buddy keep the pedal down and tighten up the bleeder. This makes it a whole lot easier to "see" whats going on and you capture the fluid so you don't make a mess. Empty the bottle when you are done into an approved disposal container. DO NOT RE-USE THE BRAKE FLUID!

John B.