novi 1200

i just put this kit on my 72 duster and i will tell u this much it is not a direct bolt on kit. u will need a pre 68 water pump and poss the pulleys as well. On mine we machined the pump face and had to get a diff crank pulley and then had paxton send an additional crank pulley spacer and had to machine it down to get the belt to line up properly. Then depending on if u are going to run a mechanical fuel pump u will have to boost reference it, or if you go the electric fuel pump you will need a boost reference fuel pressure regulator so that u have sufficient fuel pressure when under boost. But i will say this it is deff worth every penny i have spent to complete this in stall, but i also will say that if wasn't for my very knowledgeable friend and engine builder it wouldn't not have been possible. It makes 7 psi at 6gs at 5gs its right around 6psi.