70 Dart - Turbo Candidate no.2

Due to a few life issues at the moment I won't be putting the turbo setup on the motor right away and will be running NA for a year probably.
The cam that's currently in the 360 is worn and a couple lifters need to be replaced, so i figured since i'm elbow deep into it i might as well toss a new cam in.
Looking for good street pounding torque and off the line response, and have this cam also work decent when I toss the turbo on it.

Here is what I bought.

Lunati 60402LK
http://www.summitracing.com/parts/LUN-60402LK/

Cam Style Hydraulic flat tappet
Basic Operating RPM Range 1,400-5,700
Intake Duration at 050 inch Lift 220
Exhaust Duration at 050 inch Lift 226
Duration at 050 inch Lift 220 int./226 exh.
Advertised Intake Duration 262
Advertised Exhaust Duration 268
Advertised Duration 262 int./268 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.475 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.494 in.
Valve Lift with Factory Rocker Arm Ratio 0.475 int./0.494 exh. lift
Lobe Separation (degrees) 112