Page 9 Post#165 is all I have for now. The Mini Tub is not complete yet. I need to weld in the Drivers Side grind and sand the welds then put on seam sealer. I needed to do the final mock up before it all goes to powder coat and I need to weld the brake line hold down clips on the axle. I will be finishing off the Mini Tub and doing the roll bar when those parts are in the shop, the whole car will Immediately go to paint after this is all done and back on the ground. I will take pictures of the whole process an post them here.
I will NOT be detailing the undercarriage, it will get cleaned up and that is all. I actually drive all of my cars, if I don't drive them then I SELL them to someone who will.
