update on some of my post with pics hopefully

94 thru 98 GJ have have the 5 on 4 1/2 wheel pattern. I machined the bracket and with a step in so that it would be the same thickness as the drums.

Then I used green bearing and had to make spacers to make back fluch with the caliper bracket for the green bearing flange to bolts solid up to the caliper bracket. I also drill the fifth hole the other four are perfect.

I aslo used the housing studs for the axles from a 2000 or so pickep truck cause they were longer to compensate for the caliper being thicker the the drum backing plate. I also put the calipers i the back.

Now the axles were put back in the same spot as there were, cause of me putting the step in the caliper bracket. Now what I didn't compensate for is the thickness of the rotors are thicking that the drums so the rearend is probably 1/4 in. wider on the both sides.

Which didn't hurt me none.


Lee