I need all you nitrous guys...

Some of them are.......some say they are but some of the jets will hit the divider. Also it's very possible the brass spray tube is off a little. This is why you need to pull off the carb and bolt the plate to the intake and watch the spray pattern. He can make sure the spray pattern is right and make sure there is nothing clogging the system. The sniper system is a budget system and I'm sure it's not help to the same standards as the regular NOS systems so I wouldn't rule out the plate is bad......it was working correctly and now it's not. One of the bars could have moved. If it did the only way to know is to operate the system with it on the intake. I do that on every nitrous install just to double check it works and the spray pattern. If the plate is shot I'd recommend either the Zex perimeter plate or and Edelbrock plate. The Edelbrock plate uses spray bars but they are made of stainless and not brass like the others. If you want the top of the line plate the Speedtech diffuser plate is it. I plan on upgrading to one here in the future.