Power Steering Pump Pulley not lining up

I'm going through the exact issue. Got a PS that was resealed and all painted up nice. Now the pulleys don't line up on my 340 using 66 brackets and water pump and crank pulley. The 66 and earlier used the federal/TRW type pumps. You can use the pump you have and just swap pulleys. Problem is the pulley offset (dish). I ran into a problem with the shaft being a different diameter and could not press on my original 66 pulley. Now I'm getting a reman 66 PS pump from NAPA.

Seeing pictures will help. If it's only 1/16 to 1/8 inches off. I'd use spacers for now.