74 Duster Dash light swap.

Pictures, yes that will help. I just put a couple dashes in my 74 duster. Also previously I basically destroyed my gauge cluster from my 73 Duster doing exploratory surgrey on it. Built one gauge cluster out of two for my 74 etc.. The white face stickers sounds sweet.. Brighter lights are needed too. Whered you buy the stickers from? Did you get some new clear lenses? All the lenses I have seen are scratched and milky when you get them out and inspect them.. I spent a few hours polishing mine but the slightly milky color is throughout the plastic and cannot be buffed off.. I can probably add some good guidance, but I am not as crafty as some on this site, maybe someone else will chime in as well, my main lack of expertise on this type of gauge cluster bezel is removing the lenses from the bezel as they are plastic solder melted in place..


I bought my WhiteFace guages from http://www.whitegauges.net/ they have the gauges for both the 195 and 225 6 cylinder engines. I also bought the 5 foot Rope LED light(Green) so I will end up wrapping it around the gauges. I will take a picture of that in the morning. I have also gone to www.superbrightleds.com, they have any light you might need on they're site for really cheap.



2Darts:

after Checking my Whiteface Package I noticed that my instructions were Missing, so I contacted them and they Emailed me the directions and even offered to snailmail me the instructions I promptly thanked them and Printed out what I got through Email. Thanks for the Step by Step, I will start on it in the morning.

I was also wondering what type of Woodgrain you swapped out for, I have the original Gold duster package through out my car(with an exception of the Wheels/Tires, and the replaced Vynal top). I was wanted to inquire what looks best and get a few opinions on if I should get a custom made aluminium/steel dash cluster or stick with wood.