Separate names with a comma.
ET Wheels still offer small bolt pattern. American Racing offer small bolt pattern on any wheel that show "custom" under the title "Bolt Pattern"...
I'd say those hydro lines are magnetized and the roof rails bent towards them and .....caused that car to float in the background. Lol In all...
My immediate thought was Volkswagen with those narrow mounts. So I'm with the European group. Unfortunately still just guesses, not helping you...
Always look for the MPN (Manufacturers Part Number) in the specs area on EBay. You can usually query it and get a little more info and find other...
Cuda, perfect name for a precocious dog.
Yes, they should see and solve the problem better than we'll ever figure it out from the description.
You may want to read the thread "71 dart 17 inch wheels 5x4 bolt pattern" it addresses backspace etc.
I am pretty sure that a +6mm offset with a 4.25 backspace is the same as a 0 offset and 4" backspace. A -6mm offset and 4.25" backspace is equal...
I'm doing the same on my Barracuda and have measured, measured and measured again. The stock 8.75 allows for 5.5 inches from the face of the drum...
Ok thanks guys.
Yes, thats what I meant. Thanks
Sorry, read that backwards at first time I replied. I don't think a 35mm offset with a 5.87" backspace will work. You likely can't go any more...
Do you guys put anything on the backside of your brake pads, such as RTV, to reduce squealing on your 4 piston KH brakes?
Great original sticky, thanks. Just of note....two of the four bolts that are removed from a 10" drum backing plate are the same length and...
Thanks for the offer but I need to get this done and off the hoist so I can do brakes on my truck, brakes on my sons truck and start flipping...
Time for me to get moving. Have a good day guys.
That Slip Plate Graphite is $50 a spray can in Canada!!!!!! Holy #$@%. Is it liquid gold? lol
Sounds impressive. Do you guys know if I can use Slip Plate over painted parts or is it just for bare metal?
I'll give it a try. Thanks
Not familiar with that stuff. Is it a primer pre-coat or a type of finish?
I'm pondering whether to paint my new KH calipers before I install them or not? And if so, what colour?
Good morning, Sun is shining but its just 1 degree (34F) here. 2 year old grandson is visiting for the day. Man they're great at this age. He...
^^^^^Agree^^^^^^ How do they adjust the torsion bar without adjusting the camber and toe??????
They look like Mopar Performance and mine have similar "casting cracks" that are not through. But leak check them to make sure. BTW, you...
Yes, if installed correctly the numbers are visible where the torsion bar is visible at the crossmember. You may have to take some mineral...
????? Don't they just have the number stamped in the end 892 and 893?
Time to get working on the car. Have a good day guys.
Ya, you're probably 6 hours north, 12 hours straight west from me and getting the same warm weather. I've never been more ready for the snow,...
That's some time past. Truth be known, I put it on the hoist at the beginning of July. Now I have to get it off the hoist so we can start...
Morning, looks like a great day to hang in the garage. 1 degree (34F) now and going to warm to 19 (67F), which is warm for November here. Had a...
