Separate names with a comma.
Selector shaft seal is a common source of leaks.
IMO, forget about the sturdiest rear end, drag strip performance or a chassis dyno. Get it on an engine dyno first and perform proper tests with...
I would expect the lacquer to lift the rattlecan stuff.
It has a fuel cell in it now. When it had the stock tank in it, I could fit a pair of slicks, a spare tire, tool box and small floor jack in there.
I've heard it said that because the 60 housing is difficult to brace, the wheels will begin to toe in on a big hp car.
68 Satellite. 8.5 440, 906s , Torker intake, 750dp, 1/78 headers, 292 Magnum Comp cam, 10 inch GER converter, 3.23s 28x9 M/T ET Drags. 12.35 at...
Sounds about right to me. You have to take into consideration torque converter slippage.
This may not help much. Mine is a 72 duster using the 72 distribution block with 73+ mc and discs. Lines are The Right Stuff brand.[ATTACH]
David Freiburger says that the Roadkill show uses pre 75 cars because they are smog exempt in CA.
I use Evercoat Fiber Tech on welded seams. http://www.evercoat.com/images/ePIM/original/TDS_100633_FIBER-TECH-4.2016.pdf
My clips were from OER I think. I had to pry them away from the body quite a bit. Otherwise the edge of the trim would hit the screws that hold...
Here in Oklahoma, we don't even have safety inspections.:D
Syleng, you might want to reread your poll questions. I believe you have your wording mixed up. I would vote in favor of the dual plane .
The OP should be more specific about what cam he actually has. A "one step above stock" cam in a 318 could be a stock 360 2v cam
This is the best pic I've got of this tire. 205/70-15 on a 15x6 . Rear is 275/60-15 on a 15x8.[ATTACH][ATTACH]
Some B body pics please :poke:
The Offy dual port is a TERRIBLE intake.
I would leave the engine alone and change the converter.
made my own[ATTACH]
They will bolt on but the marker lights are different.
I'm not sure why someone would want to build a hot rod 318 with the intention of sticking with the stock torque converter. Stock converters are...