Separate names with a comma.
Ok I was able to get something done today. I took the car out and punched it from 45MPH and yes it did downshift at that speed. Second I retrieved...
You know Kim now that you brought it up I'm not 100% sure if it has down shifted before? This weekend i will road test and see what happens at a...
Well I have been rained out on my attempt to get under the car. My garage is tied up with another project so my only option was the driveway and...
Ok let me go investigate the Pan rail and i will post my findings thanks Rusty.
The P O also told me that it has a cheetah kit. When i put it in drive it shifts hard going thru the gears but it does so on its own it's not a...
Being the second owner of the car very little was passed on from the previous own. Here are some numbers i found on the tail shaft area of the...
Since I have never owned a car with this engine transmission combo I wasn’t sure if there is room for improvement here. Driving at 60mph should I...
I have had good results with this.[ATTACH]
What is that big thing hanging down under the dash?
I certainly don't have anything like that.
6' Foot but my bench seat is like sitting in a hole and i'm not sure if the buckle i am using is at the correct position.
Ok this one has me stumped on what they were thinking or maybe my car is just missing something. 1971 Dart Swinger with a bench seat and lap belts...
Learn something new...thanks
Could you explain the term Bucking on the starter. Is that when you release the key after trying to start the car and it sounds as if the engine...
Has anyone with a mini tubed A body come up with a workaround to run their exhaust past the rear axle? I know if I swapped the gas tank for a fuel...
Is chrome box the name or just the color? Who sells that ECU?
Here is a long overdue update. I hate it when a thread leaves you hanging after so many offer there help so I don’t want to be one of those guys....
You would think if both surfaces were as smooth as a machined surface you wouldn't need goop at all.
After you mention checking the bolt area for flatness i checked my Pan,and yes it needs a little hammer time.
Thanks... I think the first seven replies have cover the key points I need. Thanks again.If the weather is decent this weekend and i don't get...
When installing a cork style oil pan gasket on a 360 LA stock pan. Which of the following is correct1. Install RTV only on the block side...
I will use your 3 sheets of printer paper suggestion.
[ATTACH]
Test...test
Just curious about this i checked mine scene my motor is out of the car right now. I found mine is no where close to .008 or 203mm. My feeler...
I did have what looked like black paint flake off one of the heads. Maybe it is just cast iron.
I'm puzzled as to why this engine was once painted black? Was that a Mopar color at one time?
Some first time engine pull pictures"under my ownership of this car"[ATTACH] [ATTACH] [ATTACH]
I think everything you are describing here is a best practice. After all without oil you wont make it out of the driveway.
OK that makes sense now i probably have confused people on this one. Sorry for that i jump in and out so much because of my work schedule. I hate...
