Separate names with a comma.
22ga sheet metal
There was a Barrett Jackson auction broadcasting a week or two ago.
I run AMSOIL Z-Rod. High Zinc and they add rust inhibitors as well as its designed for older cars that tend to sit and wait for a nice sunny...
I just bought a RecTeq 700 and they have a cold smoke box. Maybe traeger has something similar?
Since you used labour instead of labor am I correct for assumed the “$” was Canadian maple bucks and not American freedom dollars?
My starter broke in the same place. Just bought a new one for $25 off eBay. Not worth the hassle to me to try and run down a company for a...
That seems like an ok price there...plus for less than $500 you could buy one of those, buy a rebuild kit from A&A, bolt in sprag, and any tools...
Do you offer them without converters? What’s the power rating on these? Do they have a bolt in sprag, billet drums, or anything else to help them...
So it might do a high PSI (still less than a 2 stage compressor at 175psi) but what’s the diameter of those lines? Pretty small right? Bigger the...
MaxLine is what I used. $200 for 200’ and 6 fittings from Amazon. 3/4” pipe, they have larger sizes and a 1/2” side as well.
Maybe back in the 90s that would matter but in this day of eBay the buyer has ALL the leverage. To point that it’s a real roll of the dice to sell...
Several make ones that use the transmission cross member bolts. eBay, USCartool, and Mancini all had them when I bought my years ago
Yep. PM’ed you
Your inbox is full
Feel bad for the good people on Tennessee. Unlike the people that enjoy the pain of watching the videos this guy puts out they have no idea what...
That guy is one of the best instructional video providers on YouTube for fabrication and welding. Taught myself mig and tig from him, weld.com’s...
Then shift like it’s a diesel, 4500ish. Just really joking with that statement but needing to slow a car down is better then wishing you had a...
And have two keys like a stinking Chevy. No thanks. As others have said if you really want to use those old worn keys you can have a lock smith...
Yeah that’s a dart sport/demon set up. Doesn’t work for a swinger opening.
The wife and I fabricated a dash for my 71 Swinger. Was a tedious process but let me get all the gauges I wanted into the stock opening.[ATTACH]...
When I clicked the link it took me to some Dodge Ram headlights but there’s no way it would work for a swinger dash for all those years. Maybe a...
I’m so happy for you! You found your tool snob soul mate! Some people spend hours online to find theirs and you found it right here on this...
You’re a bit confused on the Apple front. It’s the Mac Pro not MacBook Pro that’s made in the US. The Mac Pro is a desktop computer that’s a few...
Wish I had learned that vs how to make lath tool bits. Could use the drill bit knowledge now.
When I moved to my new shop I went with high flow fittings and the difference in hole for the air to flow through is shocking.
Even so all I read about is that you need the flow to use impacts and other tools and bigger the hose better the flow.
The part that always interests me is that at the factory they all use what look like 1/4 air line. But out in the field 1/4 is regarded as too...
It’s an AMG so speed isn’t an issue. It’s like the viper, hand built and they all sell regardless of cost.
When you pull the trigger so you actually see the gauge move on your regulator? Should drop some, I actually set my gas with the trigger pulled so...
I have an indoor cover from Covercraft and really like it! But pretty much anything would survive indoors.
