Separate names with a comma.
That comment was not directed in your direction...was all tongue-in-cheek anyway.No one is going to 'make me' feel bad about anything,...
Yes sir!The 2947 would do the job. Plus, I'm sure Mike would be glad to let me watch him put it together right.
Gee. I think that made me feel bad. :( Used to be a 290º@.008" duration cam was close to as hot as it got on the street.I'll have you know I...
There is more to the 'directly attached' part than weight, as in spinning all the time in real time.Still a valid option, though (direct...
No email alerts. Must've missed one.Not exactly. It's a '69 engine with an aluminum 'front end'. Not sure of the 'stock V-8 radiator' part....
Thanks. I missed that one.Yeah, at 2.7" it is short. Just make it 2", maybe attach it with 'extra strength' velcro 'cuz there would be zero...
The 2747 is a tight go. Spec'd at 3.38", I have 3.50" in front of the pulley.Maybe I don't have room for one at all. Mancini's is listed at...
I understand this is more a crap shoot than not. Might as well start with some educated guesses from folks more familiar with the item than I am....
Good to hear. You are welcome.When you put it back together, keep the rod orientation in mind.There is a lot of good information in this...
You are referring to the bracket that Dave mentioned? I did buy one'a those. A brand new one..with not quite the good-looking patina of the bay...
My head hurts at the thought of making it work just looking at one'a those things. A Black Art indeed.But then, I sent my brand new...
I did miss that. Still, I don't see it. Your bracket has a horizontal mount, mine is vertical. You end up vertical, with the 90º bend of the...
Much shorter than what I have. Thanks for looking, though!
That's fine, but metal fabrication isn't something I'll be doing.Besides, there remains the 5HP issue. Sorry. Can't do without it!
I do have the room. The hole in my hood with the bracket scoop takes care of that.I am familiar with the heat shield, but don't want one....
Existing parts: Edlebrock RPM Performer with Holley 4150.Intended change: Adding 1/2" phenolic spacer under carb for heat protection.I am...
If you are headed in the 'take it apart' direction, I'll add a couple of things to consider.Keep all the plates/shims/springs straight. Take...
A dirty (not talking about the neutral gate...but dirt) shifter can cause shifting/grinding stuff as you describe. It's happened to me. I...
This in reference to taking the rods out of the shifter? You did say 'out'. This is NOT a reference to moving the shifter levers back and forth...
Considering this: A855 - 5 SpeedWhat is the general point of view of the efficacy of the 855?I'm 'on the list'. I have always had my...
Yes, the ballast has been around the block discussed a few times. I'm sure I've not read all of the threads.Given (from Demon408 years back):...
Read, understood, and known.Which was and is my point...which is why I asked the question.I've seen the 'superformance' catalog and found a...
Yes.It makes no difference. If they seal.That is what I question.Intake gaskets are not .040" pieces of paper. Why is that? If .040" of...
As said, I have no troubles, I'm not trying to fix anything. A .040" paper gasket with no coating/finish to it at all does not, to me, seem a...
...as a decent 4bbl gasket available these days?I got a 4-hole 1/2" phenolic 4150 spacer from Holley. The why of that is not pertinent. It...
Yes, this is an old thread. A final result is better posted here (sez me) that an isolated new post, so here are some facts for y'all.I was...
DIY is fine..and something I've done for decades. I've got more stories of 'professional' screwups than you have the time to listen to...things...
When I was looking for a booster replacement, I 'found' one on the above site that said it fit my make/model/year. Only after asking them for a...
My OEM booster died recently. Time for a rebuild.I sent it to Power Brake Booster, PDX, Ore.What a difference!I've not had consistent...
Thanks for saying.Again, the only reason I brought it up is to maybe help the OP from getting screwed.$5,000? :Oh My!
