Separate names with a comma.
Years ago I picked up a box of NOS mopar parts at a local flea market for $15. Ended up selling almost everything for around $1700. I kept the...
The city shut down the coffee and cars monthly event here in Morgan Hill. Outsiders complained to the city about it. Glad to see someone's...
First time it's been out a night in a long time. It was nice to just go cruise around. [ATTACH]
Aerosmith Done with mirrors tour at the Cow Palace around '85 or '86. Almost missed our train back home. A bit freaked out as San Fran was just...
If it's an inverted flare you can get copper gaskets. I've had good luck sealing up minor leaks with them.[ATTACH]
My first car was a 1970 Pontiac Tempest. My dad bought for me when I was 15. He paid $150 for it. It sat in the back corner of the shop for about...
Here's a side view to show the floor clearance.[ATTACH]
Yup, the Jeep's sitting idle right now. No one wants to head to the mountains for some reason.[ATTACH]
Started my frame connectors today. Passenger side is fabbed up and ready to weld in. Drivers side will be done tomorrow. I did have to trim one...
Well, I lucked out and finally found a place local to get steel for my projects. They're prices are fair and they're open when I need them to be....
Found this last night. My grandmother's 68 barracuda that she bought brand new. Lot's of memories of trips to the mountains. She loved the car...
Christmas/birthday gift to myself that I picked up yesterday. A coffee grinder that's over a hundred years old and still works[ATTACH]
The only good scrapyard won't allow people to rummage through the scrap (someone was backed over by a truck in their yard). That's where I used...
Due to this whole covid shut down all the metal suppliers are closed when I get off work and no longer open on weekends. Anyone have experience...
Well the factory forgot to install the reinforcement on the rear bolt hole. It's on the front hole.Made a template for my subframe connectors...
No fans allowed at sporting event here in California.
I replaced the carpets years ago and there definitely wasn't any of those reinforcements on the floor. I was just looking and the passenger side...
I'm preparing to build and install subframe connectors. While under my car today, I noticed the drivers side floor around the inner front seat...
[ATTACH]Mine is AA9 chrysler gray metallic. Unfortunately, this is the only picture I have of it completed. It was an overcast day and looks...
Our '17 Ram trucks do that quite often. We keep spare headlight harnesses in stock. The connection at the bulb gets loose and burns up the plug....
I thought it was the studs keeping it from coming out, so I removed them. I still had to remove the exhaust manifold and starter to get it out....
I was able to reuse the cardboard on the back of my seat when I did mine. If you don't put it back in there the carpet won't be flat, because of...
The steering box on my 66 barracuda finally gave up the ghost and started puking oil out the sector shaft. I've owned the car since the late 80's...
[ATTACH] You may want to look into this stuff. It's supposed to work really well.
Thanks RRR hadn't thought about angling them. I little more fab work, but it looks easy enough to accomplish. If I have to I'll get some smaller...
For a winter project I'm going to install subframe connectors in my 66 Barracuda. I've already picked up the 1 1/2 x 3 rectangular tubing...
If you remove the upper bump stop there should be enough droop in the lower control arm. No need to disconnect ball joints.
Do yourself a favor and just unscrew the cluster. Yeah, you'll have to lower the steering column to lean it away from the dash. It makes getting...
Was doing a lot of offroading up until recently. Hopefully I'll get back to in the spring.[ATTACH] [ATTACH]
In no particular order The Big Lebowski, anything Tarantino and Robert Rodriguez have made, vanishing point, and blazing saddles.
