Separate names with a comma.
Lot of good technical information here on the de-coupling, sound barriers, sound isolators etc.Products | Sound Deadener Showdown
Does it still have the "test". button under the hood ?
Does your car have seatbelt interlock system ?
Looking for a 5.9 Magnum. Would prefer if I could hear it running in the truck,but not necessary.I am in Lincoln county North Carolina, would...
I had a 30x40x8 garage in Ohio that was fully finished with blow in insulation in the attic, bat in the walls and fully drywalled. I used a wood...
What part of NC ?
House isn't much bigger than a van, AND there is a creek in the front yard ![ATTACH]
Moved to a house half the size with a garage that's 40x100
thanks, but I no longer have it since I moved..
ii had a 30x50 with 12' walls and 16'ish at the peak wood fram and metal siding. I used the prodex from the link.I I stapled it floor to...
I have a slant six 904 combination in my Scamp. Is there an aftermarket tailshaft bushing that is sized correctly on the inside dimension?lit...
Inbox is cleared, conversation started.
14" SBP wheel with a d78x14 tire on it that holds air.Was in the trunk of my 1971 Duster when I bought it..Moving next week needs to go....
I don't think so.
I have a set of late model Dart bucket seats. One track has been modified to bolt into an A body.They are in good shape, other than some dust...
Don't care for his goofy channel, but I can most certainly understand why he's moving out of shithole Houston.I am leaving here October 23rd and...
Our cat brought home a turtle...
Alrighty now..I am going to piss off some old hippies and liberals with this post.I have an interest in history. One of my favorite historical...
I put about 500 miles on the rental car while I was housing shopping around Stanley and Lincolnton NC area and thought the roads were relatively...
Looking forward to getting out of Houston traffic, and driving on nice country roads.
Moving from Houston Texas to Vale North Carolina at the end of October.
Moving soon, these need to go !!
These are still available. I'm going to be moving soon and these need to go!
I can throw in a set of nice dust shields for free if somebody wants these knuckles ![ATTACH]
Responded
Replied to your PM.
Have a set of fine thread strut rods with factory nuts, and bushing washers included.They are straight and painted and ready to install.$35.00...
FMJ spindles, and pin type caliper brackets for the 10.875" rotors. Caliper pins, lower balljoint, and caliper brackets bolts included....
1 drivers side bbj upper control arm.Balljoint threads are in good shape.Bushing holes are not cracked, or stretched.$45.00 shipped...
