Separate names with a comma.
It has gone up since I bought a pint of it. The cost comes from the fact that the paint is no longer made and the suede. Paint in general is...
MyMopar - Mopar Forums & Information - Mopar Wiring Diagrams 1972 to 1976
Do you have a service manual?? The wires should be close to where the ballast was mounted.
I used the wires that went to the ballast went thru a terminal strip. the terminal strip I jumped a couple of terminals as to have voltage for the...
Sorry for your lost, they become a part of the family and missed
Instrument Specialties has the suede PPG lacquer paint in pint size for you interior parts. It is a little pricey but works great and looks great
Here. There is a member that makes them. I thought it was a female in Florida, but that has been awhile and my memory i getting bad.
There are many ways to mount a tach. I used a bracket that slides under the dash pad and ran the wires thru the vent. Search the forum, there are...
yes or white grease
Yes I need to change the header,
Mine was loose too, Retorqued it and put the carter key in
You are second in line20 pounds UPS ground is $42.00 so total is $192.00
You are first, UPS ground, they box, is $36.00 to total is $186.00
Going thru some parts in the basement and have a new in box, a Richmond 3:91 ring and pinion set for a 489 case. New in box, but box is in rough...
I had to do it to mine, bend it up so it would clear.
Yes the original color code
Mine is the same combo A56. Love this combination.
Jegg's has Cometic in .027' and .030"Cometic Gaskets C5633-027: Cylinder Head Gasket Chrysler 318/340/360 | JEGSCometic Small Block Mopar...
No problem, most here like to help.
Good luck on your project
Another Classic a kit
1966-1974 Dodge Charger Parts | MN3104 | 1967-74 A-Body; 1966-70 B-Body Front Door Glass Channel Seals | Classic Industries...
New NOS Mopar. Door Glass Run Vent Guide Weatherstrip Clips.SALE!!! | eBay
If you can use a spray gun, Instrument Specialties sell a pint of the correct black paint. It is an exact match to the factory, but on the high...
Front glass guides #CP-693279
MOPAR PARTS - DODGE MOPAR PLYMOUTH GLASS PARTSI think I got mine from Van's a complete kit, guides and felt, a...
Any of the vendors. R/T Specialties. Classic Industries, Year one.
Go to mymopar.com and download the manual;http://www.mymopar.com/index.php?pid=109
The 73 should be the same as the 72 in most cases
The upper bearing and isolator rubber can be bought, I got on on eBay for a few dollars
Here in NE it is going to be a crappy fall, the leave are already falling, but not turning colors, rainy and cold
The only one that I can think of that has good parts is AMD;Body Components
I am running the Fast 2.0 on my 408, I love it.
nice combo, and the Holley will work