Separate names with a comma.
*Disregard me I didn’t read the ad completely*
45 shipped
Yeah
I have Porsche calipers on the front and Jeep calipers on the back. I use a factory drum/drum distribution block, and a adjustable wilwood...
A pair of bbp spacers. Slight damage to the countersinks on both (shown in pics).55$ shipped in the lower 48[ATTACH][ATTACH][ATTACH]...
Hey guys, I have a reproduction Grant tuff wheel and adapter I don’t need. Nice shape overall. Splines look good.Kicker is something between the...
1450$ shipped in the lower 48
Next evolution I might embark on is power assisted brakes. The manual master works fine during hard braking and I didn't really notice any high...
kick ass!!! Thanks for the posts! Hindsight truly is rearing it’s ugly head right now. Wish I would have tested the stock stuff. Because I could...
No unfortunately. Not exactly a fair comparison because of the weight but I found a test on yt with a RC Dakota equipped with 11 inch single...
Did another round of tests this evening. Got the brake bias to what I believe to be as good as it’s going to get. Same temp, same road, same...
Finally got around to doing my first round of 60-0 stop tests! These are consecutive runs, using the ancient set of 235 front, 255 rear defender...
Additional photos[ATTACH][ATTACH]
Hey Fabo, I have a SBM Edelbrock pro flo 4 efi setup with tablet that I no longer need. P/N 35900. It’s all brand new. Any parts that came in bags...
Pm sent
300$ Shipped in the 48
315$ shipped in the lower 48
Wasnt me fixing it unfortunately so I don’t know exactly what happened. But a brand new parts store caliper seal was bad and there was no external...
330$ shipped in the lower 48
Brand new never used Edelbrock universal efi fuel sump kit P/N 36031. Opened box just to inspect the parts. Plans have changed and I no longer...
65$ shipped in the lower 48
For anyone coming across this thread in the future. I emailed Cass at Doctordiff.com, for 318$ you get custom made 1541 axles with your choice of...
Has anyone been able to source a reasonably priced set of new axle shafts for an A body 8.25? Tons of options for jeeps and dakotas, none for the...
Porsche brembo caliper brake swap for 473$
After watching this (11:30) [MEDIA]Seeing how I could use angle iron for an adapter bracket convinced me I could do this swap on my duster....
85$ shipped
I swapped to the Porsche calipers first while retaining the rest of my brake system as it was to aid in troubleshooting if I had any issues. I’m...
Hello fabo! I have a pair of 73+ Calipers with Fmj hoses (for rear caliper mount application), corresponding brake pads with hardware, and 10.95...
Next
Hi fabo, i have a set of 10x2.5 rear drums off my 8.25. Reason for removal was I upgraded to Jeep disk brakes. Ready to install and run as is. Or...